Robot Wires
Each robot has a set of colored plugs that need a matching wire dragged between them before it powers on. Simple enough at first — until later levels drop blocked red zones straight through the middle of the board, and the direct route you'd normally take is suddenly off-limits.
Connecting a robot
- Drag from one colored plug to its matching plug to connect a wire.
- Wires can't cross each other, and can't pass through blocked red zones on later levels.
- Tap a completed wire to remove it if a different route would work better.
- 💡 Hint reveals a next move if you're stuck, and 🔄 Reset Board starts the level fresh.
Easy Mode
Turning on Easy Mode from the start screen makes every plug bigger and more forgiving to grab, which matters most for younger kids who don't yet have precise drag control. Standard mode keeps the plugs at normal size for a tighter, trickier fit.
Frequently Asked Questions
What makes later levels harder than the first ones?
Early levels just require connecting matching plugs without crossing wires. Later levels add blocked red zones the wires can't pass through, forcing longer, more roundabout connections.
What if a wire gets connected wrong?
Tap the wire to remove it and try a different path, or use Reset Board to start the whole level over.
Is there an easier version for younger kids?
Yes — Easy Mode makes the plugs bigger and easier to grab.